Specifications

9031111 E7 Device Views
2-29
Chassis Device View
TPXMIM
Change Port Channel View
This view allows you to reassign the FNB channel used by a selected port to
communicate within the MMAC FNB chassis. It also allows you to reconfigure
a port to a stand-alone mode. To access this view do the following:
1. Within the Chassis Device view, highlight the TPXMIM icon.
2. From the Icon Subviews menu, select Change Port Channel.
When configured to operate on channels B or C, the TPXMIM provides its own
repeating, when operating on channel A, TPXMIM ports depend on the
EMME/EMM-E6 for repeater functionality. All TPXMIM ports default to
channel B when first installed. Change Port Channel view provides the
following fields:
Module Number
Displays the slot number where the TPXMIM containing a selected port is
located.
Port Frame Size &
Protocols
Opens the Port Frame Size & Protocols view. For
description of fields in this view, see the Repeater Frame
Size & Protocols View described earlier in this chapter.
Port Redundancy Opens the Repeater Redundancy view described in the
SPECTRUM Portable Management Application for
the EMME User’s Guide or the SPECTRUM Portable
Management Application for the EMM-E6 User’s
Guide.
Port Source Address Opens the Port Source Address view described in the
SPECTRUM Portable Management Application for
the EMME User’s Guide or the SPECTRUM Portable
Management Application for the EMM-E6 User’s
Guide.
Port Security
Configuration
Opens the Port Security Configuration view described in
the SPECTRUM Portable Management Application
for the EMME User’s Guide or the SPECTRUM
Portable Management Application for the EMM-E6
User’s Guide.
Enable/Disable Opens a dialog box which allows you to enable or disable a
selected port.
Change Port Channel Opens the Change Port Channel View described later in this
chapter.
Table 2-17. TPXMIM Port Icon Subviews Menu (Continued)
Menu Selection Description