Specifications

Interface Device View
Device Views EMME/EMM-E6
2-36 Management Module Guide
MAC Address Label
This label displays the MAC address of the EMME/EMM-E6 interface.
Double-click this label to open the CSI Interface Port Model Information view
described in SPECTRUM Views.
Network Address Label
This label displays the current IP address of the interface. To select a different
IP address for this interface, do the following:
1. Double-click the Network Address label to open the Secondary Address
panel.
2. From the Address/Mask table, select the desired IP address entry to
replace the correct IP address.
3. Click Update.
Secondary Address Panel
This panel allows you to view and change the current IP Address and Mask for
this device. The Secondary Address Panel includes a table with different IP
Addresses and Masks. Information displayed in this table is obtained from the
Address Translation table within the device’s firmware. The Secondary
Address Panel provides the following fields and buttons:
IP Address
Displays the current IP address for this interface.
This button allows you to save changes made to the current IP address of the
interface.
See Network Address Label for instructions on how to change the current IP
address for the selected interface.
Gauge Label
This label displays the performance statistic determined by the Gauge Control
Panel for this interface. (Refer to the Gauge Control Panel later in this chapter
for more information.) Double-click on this label to open the
Performance-CSIIfPort view described in SPECTRUM Views.
Update