Specifications

9031111 E7 Configuration Views
3-3
Chassis Configuration View (EMME only)
Interface Configuration Table
Time: (HH:MM:SS)
Allows you to set up and update the time taken from the device’s internal
clock. The time is displayed in the following format: HHMMSS.
Interface Configuration Table
This table within the EMME/EMM-E6 Device Configuration view provides the
following configuration information for the device and each interface or port:
Number of Interfaces
Displays the number of interfaces or ports available from this device.
Index
Displays the number for a given interface or port.
Type
Displays the type of hardware interface for the port. See Table 2-21 for a full
list of possible interface types.
Phy Address
Displays the physical (MAC) address of the port.
Max Frame Size
Displays the maximum frame size for the EMME/EMM-E6 interfaces.
Oper Status
Displays the current operational state of this port (Up, Down, or Testing).
Chassis Configuration View (EMME only)
This view allows you to view and modify the configuration information for the
chassis.
To access the Chassis Configuration view do the following:
1. Within the Chassis Device view, highlight the module icon.
2. From the Icon Subviews menu, select Chassis Configuration.
This view provides the following information and fields:
Chassis Type
Displays the chassis type. This field can be updated.
Hardware Rev
Displays the revision number of the hardware running on this device.