Specifications

Module and Port Configuration Views
Trap Configuration
Configuration Views EMME/EMM-E6
3-6 Management Module Guide
Trap Configuration
This area of the Module or Port Configuration view allows you to enable or
disable any of the following types of traps:
Link Traps
This menu button, when enabled, allows all packets indicating a change in
link status to be reported within the trap database. Possible menu selections
are: Disable, Enable, and other.
Segmentation Traps
This menu button, when enabled, allows all packets indicating a change in
segmentation status to be reported within the trap database. Possible menu
selections are: Disable, Enable, and other.
Source Address Traps
This button, when enabled, allows all packets indicating a change in source
address to be reported within the trap database. Possible menu selections are:
Disable, Enable, and other.
Alarm Configuration
This area of the Module or Port Configuration view provides configuration and
status information for generation of alarms by the selected module. The Alarm
Configuration section provides the following information:
Timebase (Port Configuration view only)
Displays the time interval within which the specified number of errors needs
to occur before the alarm is generated. This number can only be altered in the
Repeater Configuration view described later in this chapter.
Traffic Alarms
This menu button allows you to enable or disable detection of Traffic Alarms.
Possible menu selections are: Disable and Enable.
Traffic Threshold
Displays the threshold value within the alarm timebase which, once that
number of packets is exceeded, generates a traffic alarm. You can alter this
name. Allowable values are 1 to ~4 billion.
Traffic Alarm Condition
This menu button allows you to disable the module or port if the traffic alarm
threshold is exceeded and an alarm for the module is generated. This feature
allows you to prevent excessive network traffic generated by alarm messages
that are transmitted by the module. It also aids in module troubleshooting.
Possible menu selections are: Don’t_Disable_Port and Dissable_Port.
Collision Alarms
This menu button allows you to Enable or Disable detection of Collision
Alarms. Possible menu selections are: Disable and Enable.