Specifications

Repeater Configuration View
Error Source
Configuration Views EMME/EMM-E6
3-8 Management Module Guide
Error Source
This area of the Module or Port Configuration view provides a series of
buttons allowing you to select error types to include in the error sum. The
selectable error types are as follows:
CRC
Describes the number of packets received by the module with bad Cyclical
Redundancy Checks (CRCs).
Runts
Describes the number of runt packets received by the module. A runt packet is
one byte less than the standard Ethernet frame of 64 bytes (not including
preamble).
OOW_Colls
Describes the number of collisions out of the standard window (51.2µs) due to
a network problem.
Alignment
Describes the number of misaligned packets detected by the module.
No_Resource
Describes the number of times the module ran out of resources (i.e., lack of
buffer space) and could not accept packets.
Giants
Describes the number of giant packets received by the module. A giant packet
exceeds 1518 bytes (not including preamble).
Repeater Configuration View
The Repeater Configuration view provides information on the configuration
and operating status of the repeater.
To access the Repeater Configuration view do the following:
1. Within the Chassis Device view, highlight the Repeater Port label on the
EMME/EMM-E6 module icon.
2. From the Icon Subviews menu, select Repeater Configuration.
or
1. Within the DevTop or Application view for the EMME/EMM-E6, highlight
the CSIRptr Icon.
2. From the Icon Subviews menu, select Configuration.