Specifications

CSI Isolated Repeater Configuration View
Board Map
Configuration Views EMME/EMM-E6
3-12 Management Module Guide
Board Map
This area of the Repeater Configuration view provides a series of read-only
indicator buttons displaying which slots in the MMAC FNB chassis this
repeater resides in.
Manages
This area of the Repeater Configuration view displays the model name of the
device managing this repeater. This section also allows you to access the
Device Configuration view by double-clicking on the model name of the
managing device, or highlighting it and clicking OK.
CSI Isolated Repeater Configuration View
This view provides information on the configuration and operating status of
the network segment that the isolated repeater is monitoring.
To access the CSI Isolated Repeater Configuration view do the following:
1. Within the Application view, highlight the CSIIsoRptr icon.
2. From the Icon Subviews menu, select Configuration.
In addition to the Model Name and the Network Address, the CSI Isolated
Repeater Configuration view provides the following information:
Repeater Management
This section of the CSI Isolated Repeater Configuration view displays the Port
Group Management table, which provides the following information:
Mgmt. Name
Displays the slot number where this repeater is located in the chassis.
Group ID
Identifies a repeater in a system where a single agent manages multiple
repeaters.
Port Count
Displays the total number of ports on this LAN segment.
Ports Enab
Displays the number of ports enabled.