Specifications

SMT Device Configuration View
Configuration Views EMME/EMM-E6
3-16 Management Module Guide
SMT Device Configuration View
This view provides information on the configuration and operating status of
the FDDI Station and FDDI SMT.
To access this view do the following:
1. Within the Device Topology (Dev Top) or Application view, highlight the
FddiSMT Application icon.
2. From the Icon Subviews menu, select Configuration
or
1. Within the Chassis Device view, highlight the FDDI BRIM label.
2. From the Icon Subviews menu, select FDDI Configuration.
The SMT Device Configuration view is divided into two tables: Station
Configuration and SMT Information described below.
Station Configuration View
This section of the SMT Device Configuration view provides the following
configuration information on the FDDI station:
Ring State
Indicates the current state of the FDDI Ring. Table 3-2 provides the possible
states and their descriptions.
NOTE
The SMT Device Configuration view is only accessible for the EMM-E6 with a
FDDI BRIM attached to it.
Table 3-2. FDDI Ring States
Ring
States
Description
Isolated The concentrator is not attached to the ring.
Non-Op The concentrator is attempting to enter the ring.
Ring-Op The ring is operational.
Detect The claim/beacon process of the FDDI ring protocol has exceeded 1
second. This indicates a potential problem.