Specifications

9031111 E7 Configuration Views
3-19
ATM Client Application Configuration View
ATM Client Application Configuration View
This view provides configuration information on the ATM Client Application.
To access the ATM Client Configuration view do the following:
1. Within the Chassis Device view, highlight the ATM BRIM label.
2. From the Icon Subviews menu, select Configuration.
or
1. Within the Interface Device view, highlight the ATM Interface.
2. From the Icon Subviews menu, select Protocols -> ATMClientApp ->
Configuration.
The Configuration view includes the Configuration table which provides the
following information:
Max VPCs
Indicates the maximum number of VPCs (Virtual Path Connections)
supported at this ATM interface. At the User Network Interface (UNI), the
maximum number of VPCs ranges from 0 to 256.
Max VCCs
Indicates the maximum number of VCCs (Virtual Channel Connections)
supported at this ATM interface.
Conf VPCs
Indicates the number of VPCs configured for use at this ATM interface. At the
User Network Interface (UNI), the configured number of VPCs ranges from 0
to 256.
Conf VCCs
Indicates the number of VCCs configured for use at this ATM interface.
Max VPI Bits
Indicates the maximum number of active VPI (Virtual Path Identifier) bits
configured for use at this ATM interface. At the UNI (User Network
Interface), the maximum number of active VPI bits configured for use ranges
from 0 to 8.
Max VCI Bits
Indicates the maximum number of active VCI (Virtual Channel Identifier) bits
configured for use at this ATM interface.
NOTE
The ATM Client Application Configuration view is only accessible for the
EMM-E6 with an ATM BRIM attached to it.