Specifications

Device Events and Alarms
Event and Alarm Messages EMME/EMM-E6
4-4 Management Module Guide
CsEvFormat/Event000d0103
{d “%w- %d %m-, %Y - %T”} -
Network configuration change
reported by {m} ({t}). Device is
linked to port {I 3} on module in slot
{I 1}.
CsPCause/Prob000d0103
A device supporting link integrity, fiber
optic, or twisted pair has made a valid
connection (link) to this port.
CsEvFormat/Event000d0104
{d “%w- %d %m-, %Y - %T”} -
Network configuration change
reported by {m} ({t}). Device
previously linked to port {I 3} on
module in slot {I 1} has ceased to
transmit link integrity pulse.
CsPCause/Prob000d0104
A device previously linked to this port
has been removed, powered down, or
the cable segment has a fault.
CsEvFormat/Event000d0105
{d “%w- %d %m-, %Y - %T”} - New
source address {X 5}, is detected on
{m} ({t}), port {I 3} of module in slot
{I 1}.
CsPCause/Prob000d0105
A device, previously linked or not, has
transmitted a packet that was received
on this port. The device is either new or
has been powered up but has not
transmitted a packet during the aging
time period.
CsEvFormat/Event000d0106
{d “%w- %d %m-, %Y - %T”} - Source
address {X 5}, has timed out on port
{I 3} of the module in slot {I 1} of {m}
({t}).
CsPCause/Prob000d0106
A device linked or not linked to this port
has not transmitted a packet during the
aging time period, and has been
removed from the source address table
of the device.
CsEvFormat/Event000d0107
{d “%w- %d %m-, %Y - %T”} - Device
configuration change reported by
{m} ({t}). The module in slot {I 1} has
been removed.
CsPCause/Prob000d0107
A module within this hub has been
removed or has failed.
CsEvFormat/Event000d0108
{d “%w- %d %m-, %Y - %T”} - Device
configuration change reported by
{m} ({t}). A module has been
inserted into {I 1} of the MMAC.
CsPCause/Prob000d0108
A module has been inserted into this
hub.
Table 4-1. EMME/EMM-E6 Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message