Specifications

9031111 E7 Event and Alarm Messages
4-7
Device Events and Alarms
CsEvFormat/Event000d0115
{d “%w- %d %m-, %Y - %T”} -
Port type changed. Port {I 3} of
module in slot {I 1} has changed
types of {m} ({t}).
CsPCause/Prob000d0115
The number of addresses in the source
address table has changed. If more than
one address is learned on a port for one
aging time period, the port is
designated as a trunk port. A port
connecting two hubs or a coax segment
with multiple taps are examples of
trunk ports. If a port has one address in
the source address table for two aging
times, the port is designated as a
station port. An example of a station
port would be a twisted pair “home run”
to a PC.
CsEvFormat/Event000d0117
{d “%w- %d %m-, %Y - %T”} -
Port security violation has occurred
on port {I 3} of module in slot {I 1}
has changed types of {m} ({t}).
CsPCause/Prob000d0117
This event is only generated when the
hub has port locking enabled. When a
hub is locked, the source MAC
addresses are learned on each port.
When a port detects an attached device
has changed its address, the device will
note that the new address is not in the
source address table. This will disable
and lock the port which then transmits
this trap. This trap would be generated
if an adapter were replaced or if an
intruder attempts to access the
network.
CsEvFormat/Event000d0118
{d “%w- %d %m-, %Y - %T”} -
Port violation reset, port {I 3} of
module in slot {I 1} of {m} ({t}).
CsPCause/Prob000d0118
The network administrator has located
the offending device that caused the
port violation and has re-enabled the
port for use by the original network
address for that port.
CsEvFormat/Event000d0119
{d “%w- %d %m-, %Y - %T”} -
Environment Temperature Warm
condition for module in slot {I 1}
reported by {m} ({t}).
CsPCause/Prob000d0119
The module may be defective or a fan
has failed in the chassis. Check the
alarm log for this device for any fan
alarms.
Table 4-1. EMME/EMM-E6 Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message