Setup guide

MMAC-M5FNB SETUP
Page 3-4
7. Align the slots on each mounting bracket with the desired holes on
the equipment rack.
8. Insert a bolt (item 5) through the slot in each of the mounting
brackets and into the threaded holes in the equipment rack (item
6). Secure bolts with locking washers.
9. Tighten the nuts and bolts until the unit is secured to the rack.
3.2.2 Rack Mounting the Cable Tie Tray
A cable tie tray is provided with the MMAC-M5FNB to support and
organize cables connected to the unit. The tray is designed to be
installed under the MMAC-M5FNB in the equipment rack. To mount
the cable tray in a standard 19" equipment rack:
1. Slide the cable tie tray (Figure 3-2, following page) into the rack.
2. Align the slots on each mounting bracket on the tray with the
desired holes on the equipment rack.
3. Insert a bolt through the slots in each of the mounting brackets and
into the threaded holes in the equipment rack. Use nuts with
locking washers to secure bolts.
4. Tighten the nuts and bolts until the tray is secured to the rack.