Setup guide

MMAC-M5FNB SETUP
Page 3-5
Figure 3-2. Cable Tie Tray Installation
3.2.3 Inserting the Fan Tray
The MMAC-M5FNB is equipped with a removable fan tray that allows
for easy periodic cleaning and/or replacement if a problem occurs with
fan operation. To insert the fan tray in the MMAC-M5FNB:
1. Hold the fan tray as shown in Figure 3-3 (following page) and align
the slotted paths on the tray with the slot guides on the left and
right walls of the MMAC-M5FNB chassis.
2. Slide the fan tray forward until the tray’s face is flush with the face
of the MMAC-M5FNB. If you encounter any strong resistance,
remove the fan tray and reinsert it. Do not force the fan tray into
place as this may damage the unit.
3. Once the tray is in place, tighten the knurled knobs to secure the
tray to the MMAC-M5FNB.
MMAC-M5FNB
The Complete Networking Solution™
Multi Media Access Center