Specifications

9031732 E4 Configuration Views
3-5
Network Configuration View
Network Configuration View
The Configuration view provides information on the configuration of the
Network for the TRMM-2/-4 and allows you to modify the values of some
fields. This view provides the following information:
Ring Name
The ASCII name assigned to this ring. This name defaults to Network n,
where n is a unique integer value.
Ring Number
The number of the attached ring. If SPECTRUM cannot determine the
number of the ring, a zero is returned.
Ring Speed
The speed of the ring, which can have a value of 4 or 16 megabits.
Ring Status
The operational state of the ring.
Port Configuration
This section of the Device Configuration view provides the following
information pertaining to the configuration of the device ports:
Station Ports ON Out Of
The total number of enabled station ports on the addressed module.
Ring Ports ON Out Of
The total number of enabled ring in/ring out ports in this port group.
Enable All Station Ports
This button allows you to enable all the station ports in this port group by
setting the value to Enable. The default value is NoEnable.
Enable All Ring Ports
This button allows you to enable all the ring ports in this port group by setting
the value to Enable. The default value is NoEnable.
Host Configuration
This section of the Device Configuration view provides the following
information pertaining to the configuration of the host:
Commands
This button allows you to send commands to the device by setting the correct
value. Possible commands are HardwareReset, SoftwareReset, Open, and
Close. The default value is NoOperation.