Specifications

Security Configuration View
Configuration Views TRMM -2/ -4
3-8 Management Module Guide
Claim Token Errors
The threshold field allows you to set a value for the Claim Token Errors alarm
threshold, and the state button allows you to Enable or Disable detection of
this alarm.
Lost Frames
The threshold field allows you to set a value for the Lost Frames alarm
threshold, and the state button allows you to Enable or Disable detection of
this alarm.
Token Errors
The threshold field allows you to set a value for the Token Errors alarm
threshold, and the state button allows you to Enable or Disable detection of
this alarm.
Beacon State
The threshold field allows you to set a value for the Beacon State alarm
threshold, and the state button allows you to Enable or Disable detection of
this alarm.
Frame Count
The threshold field allows you to set a value for the Frame Count alarm
threshold, and the state button allows you to Enable or Disable detection of
this alarm.
Ring Timebase
This field allows you to set the timebase for getting and setting all alarms for
this ring. This value is measured in seconds.
Security Configuration View
You can access this view through the Ring Security button in the
Configuration view. The Security Configuration view provides information on
the security configuration for the ring, and allows you to modify the values of
some fields. This view provides the following information:
Ring Name
The ASCII name assigned to this ring. This name defaults to Network n,
where n is a unique integer value.
Ring Number
The number of the attached ring. If SPECTRUM cannot determine the
number of the ring, a zero is returned.
Ring Speed
The speed of the ring, which can have a value of 4 or 16 megabits.
Ring Status
The operational state of the ring.