Specifications

9031732 E4 Configuration Views
3-11
Accessing the Station Table Views
This button affects the display of the station addresses, toggling the format
between MAC (Physical) and Canonical (Ethernet). The button displays the
format NOT currently selected.
This button allows you to set a filter affecting the stations displayed in the
table. You select an attribute to filter against by clicking one of the column
heading buttons.
This button allows you to sort the stations displayed in the table. You select an
attribute to sort the table with by clicking one of the column heading buttons.
This button opens the Station Alarm States Table view, which provides the
same button functions and fields as the Alarms Thresholds view, but displays
information on the state of each alarm threshold (Enabled or Disabled).
This button opens the Station Detail View, which is described later in this
chapter.
This button opens the Station Alarms dialog box, which is described later in
this chapter.
This button allows you to remove the selected station from the ring.
Accessing the Station Table Views
You can access two Station Table views available for the TRMM-2/-4 as
follows:
• The Station Table view by selecting Stations from the Network
Application Icon Subviews menu from the Application view.
• The 802.5 Station Table view by clicking on the Detail button in
the Performance View for the LAN_802_5 model containing the
TRMM-2/-4 when the TRMM-2/-4 has been designated as the
monitoring point for the LAN.
MAC/Canonical
Set/Clear Filter
Sort Up/Sort Down/Un-Sort
Alarm States Table
Station Detail
Station Alarms
Remove Station