Specifications

9031732 E4 Configuration Views
3-15
Token Ring Isolating Errors Table
This button opens the Station Alarms dialog box, which is described later in
this chapter.
This button allows you to remove the selected station from the ring.
This button opens the 802.5 Station Isolating Errors view, providing the same
information and button functions as the Station Isolating Errors view
described later in this chapter.
This button opens the 802.5 Configuration view, which provides the same
information and button functions as the TRMM-2/-4 Device Configuration
view described earlier in this chapter.
Token Ring Isolating Errors Table
You can access this view through the Isolating Errors Table button in the
Token Ring Station Table view. This view displays an Isolating Errors Table
containing information for all stations directly connected to the TRMM-2/-4
device, buttons to manipulate the information in the table, and buttons to
access other views. The information displayed by this view is as follows:
Ring Name
The ASCII name assigned to this ring. This name defaults to Network n,
where n is a unique integer value.
Ring Number
The number of the attached ring. If SPECTRUM cannot determine the
number of the ring, a zero is returned.
Ring Speed
The speed of the ring, which can have a value of 4 or 16 megabits.
Ring Status
The operational state of the ring.
Active Monitor
The MAC address of the active monitor for the ring. This address will appear
in any tables with an asterisk (*) to identify it.
Station Address
The MAC address of the station to which this information pertains.
Station Alarms
Remove Station
Isolating Errors
Configuration