Specifications

9031732 E4 Configuration Views
3-17
Token Ring Non-Isolating Errors Table View
This button opens the Station Non-Isolating Errors view, which is described
later in this chapter.
This button opens the Station Alarm Thresholds view, which is described later
in this chapter.
This button opens the Station Detail view, which is described later in this
chapter.
This button opens the Station Alarms dialog box, which is described later in
this chapter.
This button allows you to remove the selected station from the ring.
Token Ring Non-Isolating Errors Table View
You can access this view through the Non-Isolating Errors Table button in
the Token Ring Station Isolating Errors view. This view displays a Non-
Isolating Errors Table containing information for all stations directly
connected to the TRMM-2/-4 device, buttons to manipulate the information in
the table, and buttons to access other views. The information displayed by this
view is as follows:
Ring Name
The ASCII name assigned to this ring. This name defaults to Network n,
where n is a unique integer value.
Ring Number
The number of the attached ring. If SPECTRUM cannot determine the
number of the ring, a zero is returned.
Ring Speed
The speed of the ring, which can have a value of 4 or 16 megabits.
Ring Status
The operational state of the ring.
Active Monitor
The MAC address of the active monitor for the ring. This address will appear
in any tables with an asterisk (*) to identify it.
Non-Isolating Errors
Alarms Table
Station Detail
Station Alarms
Remove Station