Specifications

9031732 E4 Configuration Views
3-23
Modify Allowed Station List View
Modifying the Threshold Settings
Modifying the Threshold Settings
To change the threshold settings for one or more stations, follow these steps:
1. Move the addresses of all the stations to be modified to the Apply Settings
to list. If you are only modifying the current station, this step is not
necessary. If you wish to modify a valid station that does not appear in the
list, enter its MAC address into the Station field. For information on how
to move addresses between lists, refer to the buttons described earlier in
this section.
2. Select the desired settings to be applied to the current station and all
stations in the Apply Settings to list by clicking on Enable or Disable for
each alarm threshold, and typing a value into each Threshold field.
3. Click on the Apply button.
If the new alarm thresholds cannot be written to the device, due to the device
being down, an error message appears and you should try again later.
Reading Thresholds from a Station
To read the current threshold settings from any station, follow these steps:
1. Select the station to be read from the Stations or Apply Settings to list. If
you are reading from the current station, this step is not necessary. If you
wish to modify a valid station that does not appear in either list, enter its
MAC address into the Station field.
2. Click on the Read button. The threshold settings for the selected station
are read from the device.
Modify Allowed Station List View
You can access this view by double-clicking on a table entry in the Security
Configuration View. This view allows you to modify the security for the ring by
adding or removing stations from the ring’s list of allowed stations. This view
provides the following functions:
!
CAUTION
Do not attempt to modify Ring Security without a complete understanding of
Token Ring concepts and the TRMM-2/-4 device. Removal of the station
acting as the connecting bridge from the Ring Security Allowed Station List
can cause isolation from the ring.