Specifications

Modify Allowed Station List View
Changing the Ring Security State
Configuration Views TRMM -2/ -4
3-26 Management Module Guide
from the Disallowed Stations window to SPECTRUM, and removes all
indicator markings from the modified stations.
This button updates the Allowed and Disallowed Stations windows by reading
the saved values from both the device and SPECTRUM. This serves to reset
any changes you made to either window but did not apply.
This button will exit you from the view. Only changes that have been applied
will be saved.
Changing the Ring Security State
To change the level of security on the ring, follow these steps:
1. Click on the desired security option.
2. Click on the Apply button, and the select OK in the confirmation window.
If the new security state cannot be written to the device, a Cannot Update
error message appears. There may be a problem contacting the device, or the
firmware may not have updated, and you should click on the Read button
before attempting another update.
Adding Stations
To add stations to the view, follow these steps:
1. Click on the ADD button. A pop-up dialog box appears.
2. Enter the station address in the text entry field following the guidelines
described in the ADD button description earlier in this section.
3. Select the option corresponding to the list you want to add the station to
(Allowed or Disallowed) and click on the Apply button.
If the new station cannot be written to the device, a Cannot Update error
message appears. There may be a problem contacting the device, or the
address you are trying to add to the station’s allowed list may already exist,
and you should click on the Read button before attempting another update.
Read
Cancel