Specifications

9031732 E4 Event and Alarm Messages
4-5
TRMM-2/-4 Events and Alarms
CsEvFormat/Event00420201
{d “%w- %d %m-, %Y - %T”} - PORT
INSERTED - Device {m} of type {t}
reported that a station has been
inserted into port {I 1} in module {I 2}.
(event [{e}])
No probable cause message.
CsEvFormat/Event00420202
{d “%w- %d %m-, %Y - %T”} - PORT
DEINSERTED - Device {m} of type {t}
reported that a station has been
deinserted from port { I 1} in module {I
2}. (event [{e}])
No probable cause message.
CsEvFormat/Event00420203
{d “%w- %d %m-, %Y - %T”} - RING
SPEED FAULT - Device {m} of type {t}
reported that module {I 1} has entered
the ring speed fault state. (event [{e}])
CsPCause/Prob00420203
RING SPEED FAULT SYMPTOMS:
A token ring module has entered the ring
speed fault state.
PROBABLE CAUSES:
1) A station or ring port attaching with a
different speed than this module is
configured for.
RECOMMENDED ACTIONS:
1) Detach the station or ring port from the
module.
2) Re-configure the station or ring port speed
to match the speed of the affected module.
3) Re-attach the station or ring port to the
module.
CsEvFormat/Event00420204
{d “%w- %d %m-, %Y - %T”} - RING
SPEED FAULT CLEARED - Device
{m} of type {t} reported that module {I
1} has left the ring speed fault state.
(event [{e}])
No probable cause message.
Table 4-1. TRMM-2/-4 Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Cause
Message