Owner`s manual
Table Of Contents
- Title Page
- Notice
- Contents
- Preface
- Hardware Overview
- Checking the Site
- Cabling the Site
- Connector and Cable Pin Descriptions
- Replacing and Adding Memory
- Replacing and Adding Flash RAM
- What to Do If You Have Problems
Hardware Overview
1-2
Model 316
The Access Server 316 supports TIA/EIA-423-B signal levels on 16 MJ8
connectors. Use the Access Server 316 to connect devices such as terminals,
printers, modems, bar-code readers, or personal computers in terminal
emulation mode. You can connect the Access Server 316 directly or, where
required, using special adapters (see
Chapter 3)
.
Figure 1-1. Access Server 316 Rear View
Controls, Indicators, and Connectors
All of the Access Server 316 controls, indicators, and connectors are located on the
rear, as shown in Figure 1-1, with the exception of the System OK LED, which is
duplicated on the front of the Access Server 316 (Figure 1-2).
Adapter H8585-AB and H8585-AC are not for connection to public networks in
Sweden, Germany, or Japan.
NOTES