Owner`s manual

1-3
Hardware Overview
Figure 1-2. Access Server 316 Front View
Table 1-1 describes the Access Server 316 controls.
Table 1-2 describes the indicators.
Table 1-1. Access Server 316 Controls
Control Description
System reset switch On power up, press this switch until E appears on the
Seven-segment display. This reloads the factory set
parameters. During Flash load (three horizontal segments of
the Seven-segment LED), pressing and holding the system
reset switch will abort the Flash RAM load and force a
network boot. See Chapter 7 for more information.
Ethernet select switch This switch selects either standard or 10BaseT Ethernet.
Table 1-2. Access Server 316 Indicators
Indicator Display
System OK LED Lights (green) when the Access Server 316 has passed
self-test. Blinks when a nonfatal error occurs on self-test.
When off, indicates that the Access Server 316 has failed
self-test.
Network Activity
LED
Refer to Table 1-3.
Seven-Segment
Display
Provides error and status information.