Owner`s manual
Table Of Contents
- Title Page
- Notice
- Contents
- Preface
- Hardware Overview
- Checking the Site
- Cabling the Site
- Connector and Cable Pin Descriptions
- Replacing and Adding Memory
- Replacing and Adding Flash RAM
- What to Do If You Have Problems
Checking the Site
2-4
Electrical Requirements
The power at the electrical outlet must match the requirements shown in
Table 2-4.
The instructions assume that an appropriate AC power source is within 1.8 m
(6.0 ft) of Access Server 316.
Table 2-5 shows the electrical output from the standard Ethernet/IEEE 802.3
connector.
Table 2-4. Electrical Requirements
Parameter Access Server 316
Line voltage
1
1. The Access Server 316 automatically selects the
voltage range.
100–120 V rms/220–240 V rms
Frequency 50/60 Hz
Line current 1.0 A rms/.5 A rms
Power 68W
Table 2-5. Standard Ethernet/IEEE 802.3 Connector Output
Parameter Access Server 316
Voltage + 12 V DC
Current 0.5 A Max