Owner`s manual
Table Of Contents
- Title Page
- Notice
- Contents
- Preface
- Hardware Overview
- Checking the Site
- Cabling the Site
- Connector and Cable Pin Descriptions
- Replacing and Adding Memory
- Replacing and Adding Flash RAM
- What to Do If You Have Problems
Cabling the Site
3-6
Installing the Access Server 316 in a Rack
You can rack mount the Access Server 316 in any one of four ways (Table 3-4)
depending on how you install the brackets.
Table 3-4. Installing the Access Server 316 Brackets
Access Server 316 Installation Bracket Installation
1. Flush with rear facing outward Flush with rear
2. Recessed 2.54 cm (1 in)
with rear facing outward
Forward 2.54 cm (1 in) from rear
3. Flush with front facing outward Flush with front
4. Recessed 2.54 cm (1 in)
with front facing outward
Forward 2.54 cm (1 in) from rear