Owner`s manual
Table Of Contents
- Title Page
- Notice
- Contents
- Preface
- Hardware Overview
- Checking the Site
- Cabling the Site
- Connector and Cable Pin Descriptions
- Replacing and Adding Memory
- Replacing and Adding Flash RAM
- What to Do If You Have Problems
Connector and Cable Pin Descriptions
4-2
Standard Ethernet
Figure 4-1 shows how the pins are numbered on a standard Ethernet transceiver
interface connector and Table 4-1 lists the signals for the standard Ethernet
connector pins.
Figure 4-1. Pin Numbers and Signals for Standard Ethernet Connector
Table 4-1. Signal Names for Standard Ethernet Connector Pins
Pin No. Signal Name
1 Shield
2 Collision Presence +
3 Transmit +
4 Reserved
5 Receive +
6 + 12 Volt Power Return
7 Reserved
8 Reserved
9 Collision Presence -
10 Transmit -
11 Reserved
12 Receive -
13 +12 Volt Power
14 Reserved
15 Reserved