Owner`s manual
Table Of Contents
- Title Page
- Notice
- Contents
- Preface
- Hardware Overview
- Checking the Site
- Cabling the Site
- Connector and Cable Pin Descriptions
- Replacing and Adding Memory
- Replacing and Adding Flash RAM
- What to Do If You Have Problems

What to Do If You Have Problems
7-8
4 — Requesting load
3 — Load request backoff
2 — Loading
I — Requesting dump
O — Dumping
H — Hardware revision number incompatible with firmware revision number
N — No SIMs or wrong type SIMs installed
Rotating — Access Server 316 is operating correctly
Network Activity LED
The following table shows the connection status for each type of LED display.
Table 7-2. Network Activity LED
Ethernet
Selected
Connection Status LED Display
10BaseT Open/incorrectly terminated
Correctly terminated / no network activity
Correctly terminated / network activity
OFF
ON
FLASHING (Rate
independent of network
activity)
Standard
Ethernet
Open
Correctly connected / no network activity
Correctly connected / network activity
OFF
OFF
Flashing or ON,
depending on network
activity