User Manual

ATM Sample Configuration 4
116 Enterasys X-Pedition User Reference Manual
The following command line sets an interface name ‘vlanB’ and IP address 11.1.100.2/24 on ATM
port at.4.3.0.101:
Note: Enterasys recommends that you use alphabetic characters when defining interface
names—purely numeric interfaces will be interpreted as IP addresses. The XP will display
interface names up to 32 characters in length.
ATM Sample Configuration 4
Consider the following scenario:
Suppose you wish to set up a connection between a video server and 3 video clients. The video
server will route data through the XP to the 3 separate video clients (Video Client 1, Video Client 2,
and Video Client 3). The requirement is to pass traffic to the video clients through 3 separate virtual
channels. This will allow you to apply a unique service profile to each Client’s connection.
xp(config)# interface create ip vlanB address-netmask 11.1.100.2/24 port at.4.3.0.101
ATM Cloud
at.2.1
120.131.0.2/24
Router to
video server
0,101
0,102
0,103
154.15.0.5/24
Video Client 3
134.141.0.1/24
Video Client 2
114.111.1.1/24
Video Client 1
0,103
0,102
0,101