User Manual

Enterasys X-Pedition User Reference Manual 171
Monitoring VRRP
To display VRRP statistics for virtual router 100 on interface int1:
To display VRRP information, enter the following commands in Enable mode.
xp# ip-redundancy show vrrp 1 interface int1 verbose
VRRP Virtual Router 100 - Interface int1
------------------------------------------
Uptime 0 days, 0 hours, 0 minutes, 17 seconds.
State Backup
Priority 100 (default value)
Virtual MAC address 00005E:000164
Advertise Interval 1 sec(s) (default value)
Preempt Mode Enabled (default value)
Authentication None (default value)
Primary Address 10.8.0.2
Associated Addresses 10.8.0.1
100.0.0.1
Stats:
Number of transitions to master state 2
VRRP advertisements rcvd 0
VRRP packets sent with 0 priority 1
VRRP packets rcvd with 0 priority 0
VRRP packets rcvd with IP-address list mismatch 0
VRRP packets rcvd with auth-type mismatch 0
VRRP packets rcvd with checksum error 0
VRRP packets rcvd with invalid version 0
VRRP packets rcvd with invalid VR-Id 0
VRRP packets rcvd with invalid adv-interval 0
VRRP packets rcvd with invalid TTL 0
VRRP packets rcvd with invalid 'type' field 0
VRRP packets rcvd with invalid auth-type 0
VRRP packets rcvd with invalid auth-key 0
Display information about all
virtual routers.
ip-redundancy show vrrp