User Manual

Enterasys X-Pedition User Reference Manual 285
Protocol Independent Multicast (PIM)
Example 1
The following example demonstrates how to configure three routers that use different routing
protocols (RIPv2, OSPF, and BGP) as the underlying method to provide route information for PIM-
SM. One of the servers is attached directly to the RP (which is also configured as the BSR in the
network).
Note: To perform RPF checks to the IP address of the server, you must enable PIM-SM on the
server's network.
Figure 23. Using RIPv2, OSPF, and BGP to provide route information for PIM-SM