User Manual

Configuring RMON Groups
460 Enterasys X-Pedition User Reference Manual
Configuring RMON Groups
As mentioned previously, control tables in many RMON groups specify the data that is to be
collected for the particular RMON group. If the information you want to collect is in the default
control tables, then you only need to turn on the default tables when you specify the RMON groups
(Lite, Standard, or Professional); you do not need to configure entries in the default tables.
The following table shows the rmon command that you use to configure each RMON group:
To configure the Address Map
group.
rmon address-map index <index-number> {port <port>
[owner <string>] [status enable|disable]} |max-number
<number>
To configure the Application
Layer Matrix top n entries.
rmon al-matrix-top-n index <index-number> matrix-
index <number> ratebase terminal-packets|terminal-
octets|all-packets|all-octets duration <number> size
<number> [owner <string>] [status enable|disable]
To configure the Alarm group. rmon alarm index <index-number> variable <string>
[interval <seconds>] [falling-event-index <num>]
[falling-threshold <num>] [owner <string>] [rising-
event-index <num>] [rising-threshold <num>] [startup
rising|falling|both] [status enable|disable] [type absolute-
value|delta-value]
To configure the Packet Capture
group.
rmon capture index <index-number> channel-
index<number> [full-action lock|wrap] [slice-size
<number>] [download-slice-size <number>] [download-
offset <number>] [max-octets <number>] [owner
<string>] [status enable|disable]
To configure the Filter group,
you must configure both the
Channel and Filter control
tables.
rmon channel index <index-number> port <port>
[accept-type matched|failed] [data-control on|off] [turn-
on-event-index <number>] [turn-off-event-index
<number>] [event-index <number>] [channel-status
ready|always-ready][description <string>] [owner
<string>] [status enable|disable]
rmon filter index <index-number> channel-index
<number> [data-offset <number>] [data <string>] [data-
mask <string>] [data-not-mask <string>] [pkt-status
<number>] [status-mask <number>] [status-not-mask
<number>] [owner <string>] [status enable|disable]
To configure the Etherstats
group.
rmon etherstats index <index-number> port <port>
[owner <string>] [status enable|disable]
To configure the Event group. rmon event index <index-number> type
none|log|trap|both [community <string>] [description
<string>] [owner <string>] [status enable|disable]