User Manual

Enterasys X-Pedition User Reference Manual 485
Show Command Output
Show Command Output
To display all information about the NetFlow client on the XP, use the netflow show all command.
A sample output follows:
xp# netflow show all
NetFlow Status:
NetFlow is ENABLED
NetFlow Started at : 2002-08-01 10:11:08
Netflow Default Configuration:
NetFlow Version : 5
NetFlow Engine ID : 0
NetFlow Engine Type : 0
Active Flows Polling Interval : 1
Threshold % Heap : 85%
Default Port : 2055
NetFlow Task Priority : 230
Netflow Statistics
Intervals
Time of Last Reporting Interval: 2002-08-01 10:23:58
Time of Next Reporting Interval: 2002-08-01 10:24:58
Memory (Global)
Total Memory Available for use: 112298008
Total Memory already in use: 8531248
Percent of total memory already in use: 6.71%
Total Memory remaining for use: 103766760
Memory (Netflow)
Maximum amount of memory Netflow is allowed to use: 450000
Memory in use by Netflow: 40044
Percent of total memory that is being used by Netflow: 0.04%
Percent of memory allocated to Netflow that is in use: 8.90%
Peak memory used by Netflow: 40124
Time of Peak memory usage: 2002-08-01 10:23:44
Percent of Netflow memory used during the peak: 8.92%
Percent of total memory used by Netflow during the peak: 0.04%
Number of times Netflow failed to get requested memory: 0
(Continued on next page....)