Safety Data Sheets (SDS)
Section 8. Exposure controls/personal protection
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Respiratory protection
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point/freezing point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
1.16
1 [Air = 1]
2.3 kPa (17.5 mm Hg) [at 20°C]
Not available.
Not available.
Odor
pH
Not available.
Color
Evaporation rate
0.09 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: 96°C (204.8°F) [Pensky-Martens Closed Cup]
Not available.
9
Viscosity
Kinematic (40°C (104°F)): >0.205 cm
2
/s (>20.5 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point/boiling range
:
100°C (212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Heat of combustion
:
1.598 kJ/g
Aerosol product
Molecular weight
:
Not applicable.
Date of issue/Date of revision
:
2/11/2020
Date of previous issue
:
11/25/2019
Version
:
9
8/14
837
Cabot® Solid Color Acrylic Siding Stain
Cordovan Brown
SHW-85-NA-GHS-US