SDS

Section 12. Ecological information
LogP
ow
BCF
Potential
Bioaccumulative potential
Other adverse effects
:
No known significant effects or critical hazards.
Product/ingredient name
Xylene, mixed isomers
-
8.1 to 25.9
low
Carbendazim
-
2.51
low
Zirconium 2-Ethylhexanoate
-
2.96
low
Hydrotreated Heavy
Petroleum Naphtha
-
10 to 2500
high
Methyl Ethyl Ketoxime
-
2.5 to 5.8
low
Product/ingredient name
Aquatic half-life
Photolysis
Biodegradability
Xylene, mixed isomers
-
-
Readily
Ethylbenzene
-
-
Readily
sac fry
Chronic EC10 10 µg/l Fresh water
Crustaceans - Gammarus pulex -
Adult
21 days
Chronic NOEC 3.1 ppb Fresh water
Daphnia - Daphnia magna
21 days
Methyl Ethyl Ketoxime
Acute LC50 843000 µg/l Fresh water
Fish - Pimephales promelas
96 hours
Ethylbenzene
Acute EC50 4600 µg/l Fresh water
Algae - Pseudokirchneriella
subcapitata
72 hours
Acute EC50 3600 µg/l Fresh water
Algae - Pseudokirchneriella
subcapitata
96 hours
Acute EC50 6.53 mg/l Marine water
Crustaceans - Artemia sp. -
Nauplii
48 hours
Acute EC50 2.93 mg/l Fresh water
Daphnia - Daphnia magna -
Neonate
48 hours
Acute LC50 4200 µg/l Fresh water
Fish - Oncorhynchus mykiss
96 hours
Persistence and degradability
Soil/water partition
coefficient (K
OC
)
:
Not available.
Mobility in soil
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Vapor from product residues may create a highly flammable or explosive atmosphere
inside the container. Do not cut, weld or grind used containers unless they have been
cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact
with soil, waterways, drains and sewers.
:
Disposal methods
Date of issue/Date of revision
:
3/11/2020
Date of previous issue
:
11/25/2019
Version
:
12
15/18
3458
Cabot® Australian Timber Oil
Honey Teak
SHW-85-NA-GHS-US