SDS

Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Stoddard solvent
8052-41-3
TWA: 100 ppm TWA: 500 ppm
TWA: 2900 mg/m
3
IDLH: 20000 mg/m
3
Ceiling: 1800 mg/m
3
15 min
TWA: 350 mg/m
3
Zirconium ethyl hexoate
22464-99-9
STEL: 10 mg/m
3
Zr
TWA: 5 mg/m
3
Zr
TWA: 5 mg/m
3
Zr IDLH: 25 mg/m
3
Zr
TWA: 5 mg/m
3
except Zirconium
tetrachloride Zr
STEL: 10 mg/m
3
Zr
Ethylbenzene
100-41-4
TWA: 20 ppm TWA: 100 ppm
TWA: 435 mg/m
3
IDLH: 800 ppm
TWA: 100 ppm
TWA: 435 mg/m
3
STEL: 125 ppm
STEL: 545 mg/m
3
Appropriate engineering controls
Engineering Controls
Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear
suitable respiratory equipment.
Individual protection measures, such as personal protective equipment
Eye/face protection
Tight sealing safety goggles.
Skin and body protection
Wear anti-static clothing made of natural fiber or of high temperature resistant synthetic fiber. Wear impervious protective
clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. Wear suitable protective
clothing.
Hand Protection
There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of
chemicals. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on
breakthrough time for specific gloves. The instructions and information provided by the glove manufacturer on use, storage,
maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the
glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance
or effectiveness of the glove may be reduced by physical / chemical damage and poor maintenance. Wear protective gloves.
Respiratory protection
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Thermal Protection
No information available
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
liquid
Appearance
No information available
Odor
Slight
Color
red brown
Odor Threshold
No information available
pH value
No information available
Melting point/freezing point
No information available
Boiling point / boiling range
No information available °C / °F
flash point
40 °C / 104 °F
evaporation rate
No information available
Flammability (solid, gas)
No information available
Flammability Limit in Air
Upper flammability limit:
No information available
Lower flammability limit:
No information available
Vapor Pressure
No information available
vapor density
No information available
Density (lbs per US gallon)
7.75
specific gravity
.93
Product Code 140.0003472
Page 5 / 10
AGHS - USA OSHA SDS