Safety Data Sheets (SDS)

Section 2. Hazards identification
Precautionary statements
Prevention
:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing. Do not breathe vapor. Do not eat, drink or smoke when using
this product. Wash hands thoroughly after handling.
Response
:
Get medical attention if you feel unwell. IF exposed or concerned: Get medical
attention. IF ON SKIN: Wash with plenty of soap and water. Take off contaminated
clothing and wash it before reuse. If skin irritation occurs: Get medical attention. IF IN
EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.
Storage
:
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
General
:
Read label before use. Keep out of reach of children. If medical advice is needed,
have product container or label at hand.
Hazards not otherwise
classified
:
None known.
Please refer to the SDS for additional information. Keep out of reach of children. Do not
transfer contents to other containers for storage.
Supplemental label
elements
WARNING: This product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. Adequate ventilation required when
sanding or abrading the dried film. If Adequate ventilation cannot be provided wear an
approved particulate respirator (NIOSH approved). Follow respirator manufacturer's
directions for respirator use. DELAYED EFFECTS FROM LONG TERM
OVEREXPOSURE. Abrading or sanding of the dry film may release Crystalline Silica
which has been shown to cause lung damage and cancer under long term exposure.
:
Section 3. Composition/information on ingredients
Calcium Carbonate
≥10 - <20
1317-65-3
Kaolin
≤3
1332-58-7
Sulfonated Ethoxylated Alcohol Salt
<3
68891-38-3
Heavy Paraffinic Oil
≤1
64742-65-0
Crystalline Silica, respirable powder
≤0.3
14808-60-7
Benzophenone
≤0.3
119-61-9
Ingredient name
CAS number
% by weight
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health and hence require reporting in this section.
Other means of
identification
:
Not available.
Substance/mixture
CAS number/other identifiers
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Date of issue/Date of revision
:
2/28/2020
Date of previous issue
:
11/25/2019
Version
:
7
2/14
25200
Cabot® DeckCorrect
Tint Base
SHW-85-NA-GHS-US