Owner`s manual

ManualsBrandsCAC / BDP ManualsAir Conditioner38GVM

40GVM / 38GVM

Owner’s Manual

Multi---Split High---Wa ll Ductless S plit System

38GVM Sizes 018k, 24K, 30K, 36K, and 42K

40GVM Sizes 9k, 12k, and18k

TABLE OF CONTENTS

PAGE

SAFETY PRECAUTIONS 2.....................................................................................

GENERAL 2.................................................................................................

INDOOR UNIT PART IDENTIFICATION 3........................................................................

REMOTE CONTROL PART IDENTIFICATION 4...................................................................

DISPLAY PANELS 5..........................................................................................

REMOTE CONTROL 6........................................................................................

REMOTE CONTROL FUNCTIONS 7--10..........................................................................

CLEANING, MAINTENANCE AND TROUBLESHOOTING 11--12....................................................

NOTE TO EQUIPMENT OWNER:

Please read this Owner’s Information Manual carefully before installing and using this appliance

and keep this manual for future reference.

For your convenience, please record the model and serial numbers of your new equipment in the

spaces provided. This information, along with the installation data and dealer contact information,

will be helpful should your system require maintenance or service.

UNIT INFORMATION

Model # ___________________________________

Serial # ___________________________________

INSTALLATION INFORMATION

Date Installed _____________________________

DEALERSHIP CONTACT INFORMATION

Company Name: _________________________________

Address:_________________________________________

________________________________________________

Phone Number:__________________________________

Technician Name:_________________________________

________________________________________________

Summary of content (12 pages)

PAGE 1
40GVM / 38GVM Multi---Split High---Wall Ductless Split System 38GVM Sizes 018k, 24K, 30K, 36K, and 42K 40GVM Sizes 9k, 12k, and18k Owner’s Manual TABLE OF CONTENTS PAGE SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
SAFETY PRECAUTIONS ! WARNING PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE HAZARD Failure to follow this warning could result in personal injury, death, or property damage. Read and follow all instructions and warnings, including labels shipped with or attached to unit before operating your new air conditioner. Any time you see this symbol in manuals, instructions and on the unit, be aware of the potential for personal injury.
PAGE 3
INDOOR UNIT PART IDENTIFICATION 1 2 3 8 4 5 7 SIGNAL RECEIVING WINDOW RUN DEHUMIDIFY TEMPERATURE HEAT Front Panel Frame 2 Display Panel (shown for 40GXM units)* 3 Front Panel 4 Air Filter 5 Horizontal Airflow Louver 6 Manual Adjustable Vertical Airflow Louver 7 Remote Control 8 Room Temperature Sensor 9 Inter-Connecting Tubing 10 Control and Power Wiring to Indoor Unit 11 Service Valves 6 Display Closeup COOL 1 Remote control holder Drain Hose 9 Air intake 10 Air outle
PAGE 4
REMOTE CONTROL PART IDENTIFICATION 1. Remote Control Display 1 2. ON/OFF Button 3. MODE Button 4. Setpoint Clock, Timer Up (+) and Down (---) Buttons 5. Fan Speed 6. Horizontal Louver Swing Button 7. Clock Button 2 3 8. Timer ON Button 9. Dry Coil Button 4 10. Temperature Button 5 6 7 8 9 11 10 14 12 11. Timer OFF Button 12. Turbo Mode Button 13. Sleep Mode button 14.
PAGE 5
DISPLAY PANELS Unit Display NOTE: The display panel on the indoor unit can be turned on or off using the remote control. Press the Light button to turn the display on and off. Some of the functions will appear on the display panel, on the remote control, or both. A12434 NOTE: The temperature readout is either setpoint or room temperature and will be replaced by an error code if there is a malfunction.
PAGE 6
REMOTE CONTROL ! 2. Push the “+” or “--” button. Each time you press the button, the time moves forward or backward by one minute depending on which button you press. If you push the “+” or “--” button continuously, the time adjusts in increments of 10 minutes. 3. When the right time is achieved, press the CLOCK button CAUTION EQUIPMENT DAMAGE HAZARD Failure to follow this caution may result in equipment damage. Handle the control with care and avoid getting the control wet.
PAGE 7
SELECTING THE OPERATING MODE: Use the MODE button to select available modes. The selected mode will be displayed on the remote control and the appropriate light will illuminate on the unit’s display panel. AUTO/STOP Manual Switch The following occurs when the AUTO button is pushed: A12433 S S No temperature will be displayed on display panel. S Unit will run in HEATING if return air temperature is less than 68_F (20_C).
PAGE 8
The fan speed is selected by pressing the FAN button. This button is used to set the fan speed in the following sequence: Remote Dry Coil Icon OPER ºF ºC : Fan Speeds: Low Medium HOUR ON/OFF High A09637 NOTE: When the unit is on, the fan will run continuously in cooling or heating. When in heating, there might be situations where the fan will slow down or shut off to prevent cold blow. TURBO MODE The desired setpoint, either in heating or cooling, can be achieved faster if TURBO mode is used.
PAGE 9
Sleep Mode This mode is used to conserve energy and can be used when the unit is in the COOL, HEAT or DRY mode only. For Cooling Mode: S Push the SLEEP button. The SLEEP display will appear on the remote control. OPER ºF ºC : A09644 After 1 hour the set point will be raised by 1.8_F (1_C). After another hour, the set point will be raised by another 1.8_F (1_C) and the fan will run in low speed. S The SLEEP mode will be cancelled when the SLEEP button is pushed again.
PAGE 10
Light Function This function will allow the user to Turn ON or OFF the display on the front panel. to turn the indoor unit front panel ON or Press the light icon OFF. The remote control will display the Light Icon as shown below. Light Icon A12435 Time Delay If the On/Off button is pressed too soon after a stop, the compressor will not start for 3 minutes due to the inherent protection against frequent compressor cycling. The unit will only emit an audible beep when the signals are received correctly.
PAGE 11
CLEANING, MAINTENANCE AND TROUBLESHOOTING ! WARNING ! CAUTION ELECTRICAL SHOCK HAZARD EQUIPMENT DAMAGE HAZARD Failure to follow this caution may result in personal injury or death. Always turn off power to the system before performing any cleaning or maintenance to the system. Turn off the outdoor disconnect switch located near outdoor unit. Be sure to disconnect indoor unit if on a separate switch Failure to follow this caution may result in equipment damage.
PAGE 12
Table 1—Periodic Maintenance INDOOR UNIT Clean Air Filter* Change Remote Control Batteries OUTDOOR UNIT Clean Outdoor Coil from Outside Clean Outdoor Coil from Inside† Blow Air Over Electric Parts† Check Electric Connection Tightening† Clean Fan Wheel† Check Fan Tightening† Clean Drain Pans† EVERY MONTH S EVERY 6 MONTHS S EVERY 6 MONTHS S EVERY MONTH EVERY YEAR S EVERY YEAR S S S S S S * Increase frequency in dusty zones. { Maintenance to be carried out by qualified service personnel.