AirDefense Mobile 6.
Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.1 Supported Operating System & Hardware Requirements . . . . . . . 2 2.2 Supported Network Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. AirDefense is a registered trademark of AirDefense, Inc. All other product or service names are the property of their respective owners. © Motorola, Inc. 2011. All rights reserved.
Introduction 1 Introduction This document provides step-by-step instructions on how to install Motorola AirDefense Mobile 6.1. 1.1 Document Conventions The following graphical alerts are used in this document to indicate notable situations: NOTE ! Tips, hints, or special requirements that you should take note of. CAUTION WARNING! Care is required. Disregarding a caution can result in data loss or equipment malfunction.
2 Mobile Installation 2 Prerequisites Read the following prerequisites before you begin the installation. The prerequisites list specific hardware and license requirements. 2.1 Supported Operating System & Hardware Requirements Before you begin, you must have a laptop with the following specifications: • • • • • 32-bit versions of Microsoft® Windows® XP Service Pack 2 or Service Pack 3 (32 bit), Windows Vista® Service Pack 1 (32 bit), Windows 7 (32 and 64 bit) CPU: 1.
Prerequisites AirDefense Certification is based on successful testing by AirDefense Quality Assurance. The PCI-Express adapter cards listed above use the Atheros Communications 5001, 5001+ or 5001A chipset solutions. AirDefense does not yet certify AirDefense Mobile operation with cards that use the 5002, 5003, 5004, and 5005 Atheros chipsets. There are other adapters that are not certified but may still work properly with AirDefense; for example, 3Com® and Proxim a/b/g cards.
4 Mobile Installation 3 Installation Follow the steps below to install Motorola AirDefense Mobile. 1. Download Mobile 6.1 from the Motorola product website. 2. Navigate to the location where you downloaded the software and double click on the setup execution file setup.exe. The Welcome window displays. 3. Click Next.
Installation The License Agreement window displays. 4. Click Yes to accept the terms of the license agreement and proceed with the installation. (Not accepting the license agreement terminates the installation.
6 Mobile Installation The Customer Information window displays. 5. Enter your User Name and Company Name, and then select one of the following options to indicate who will be using the application: • Anyone who uses this computer (all users) • Only for me (Owner). 6. Click Next.
Installation The Choose Destination Location window appears. 7. Select the folder where you want the InstallShield to place Mobile 6.1. You can use the Browse button to place the software in another location or just accept the default location. 8. Click Next.
8 Mobile Installation A Wireless Card Info window displays, prompting you for the name of your card so that the proper drivers can be installed. NOTE You must have an AirDefense certified network adapter plugged into your computer to install the custom driver! If you do not, the installation will complete but you will only be able to use the Native Scan Mode. Also, if you are installing more than one driver, it is recommended that they not be the same type.
Installation Depending on your wireless card, you may or may not see the following window. 11. If the previous window displays, click the Continue Anyway button to continue.
10 Mobile Installation A Setup Status window displays showing you the progress of the installation. Then, you are prompted to register Motorola AirDefense Mobile as the default program to open PCAP files. 12. Click Yes to register Motorola AirDefense Mobile as the default program for PCAP files or No to not register AirDefense Mobile as the default program.
Installation When installation is complete, the InstallShield Wizard Complete window appears. 13. Click Finish. Your computer will restart.
12 Mobile Installation 4 Install License After installing Mobile 6.1, you must install the license to use it. There are three combination of licenses associated with Mobile 6.1: • Analysis license —Access only to the Data, Connections, Devices, and Frames tabs. • Survey license —Access only to the Data and Survey tabs. • Analysis and Survey license —Access to all tabs. To install a Mobile 6.1 license, open Mobile 6.1 and select Help > Manage Licenses.
Install License There are three methods used to install a license: • • • Using a license file Using an authorization code (the most common method) Using a legacy license key. 4.1 Using a License File A license file contains information about your license. If you have a license file, select the I have a License File option. You will be prompted to select the license file. Use the browse button (...) to locate the file and select it. Once you have selected the licensing file, click Apply.
14 Mobile Installation 5 Manual Installation of Network Adapter Drivers NOTE Manual installation of drivers for network adapters only needs to be done if you receive an NDIS error or a driver not found error. NOTE When performing this procedure, the network adapter must be connected and Mobile 6.1 must not be running. Also, this procedure is for Windows XP. If you are running another version of Windows, adjust accordingly. 1.
Manual Installation of Network Adapter Drivers 3. Select No, not this time and then click Next. 4. Select Install from a list or specific location (Advanced) and then click Next.
16 Mobile Installation 5. Select Don’t search, I will choose the driver to install and then click Next. 6. Click the Have Disk button and browse to one of the following driver setup files: For PCMCIA or PCI Express a/b/g Adapters • \Driver\WinXP\ad5314.inf on Windows XP (32-bit) or \Driver\WinVista\ad5314v.inf on Windows Vista (32-bit) or Windows 7 (32-bit) These adapters include: Cisco® 802.
Manual Installation of Network Adapter Drivers For PCMCIA a/b/g/n Adapters • \Driver\Moto5416\moto5416.inf on all operating systems. These adapters include: CACE Technologies AirPcap N a/b/g/n Cardbus - Atheros 5416 based chipset AirMagnet® C1060 a/b/g/n Cardbus adapter - Atheros 5416 based chipset For USB Adapters • \Driver\MotoUSB\motousb.inf on all operating systems These adapters include: AirPcap NX USB 802.11a/b/g/n adapter Proxim® ORiNOCO 8494 USB 802.
18 Mobile Installation 6 Support and Sales Motorola Solutions Support Center If you have a problem with your equipment, contact support for your region. Support and issue resolution are provided for products under warranty or that are covered by an Motorola Solutions Services agreement. Contact information and web self-service are available by visiting http:// supportcentral.motorola.com .
MOTOROLA SOLUTIONS, INC 1303 E. ALGONQUIN ROAD SCHAUMBURG, IL 60196 http://www.motorolasolutions.
