User Manual
220S Series Commercial Grade mSATA SSD Product Manual v2.0Cactus Technologies
®
1
Features
• Solid state design with no moving parts
• Capacities from 4GB to 128GB
• Compliant with Serial ATA 2.6 specications
• ATA-8 compatible
• Supports Serial ATA Generation I/II transfer
rate of 1.5/3.0Gbps
• Support for ATA SMART Feature Set
• Support for ATA Security Feature Set
• ECC capable of correcting up to 72 bit errors
per 1KB
• Enhanced error correction, < 1 error in 10
14
bits read
• SATA partial and slumber modes supported
• Voltage support: 3.3V±10%
Overview
The Cactus Technologies® mSATA SSD is
a high capacity solid-state ash memory
product that complies with the Serial
ATA 2.6 standard and is functionally
compatible with a SATA hard disk
drive. Cactus Technologies® mSATA
SSD provide up to 128GB of formatted
storage capacity.
The Cactus Technologies® mSATA SSD
product uses high quality MLC NAND
ash memory from well known vendors,
such as Micron Corporation. In addition,
it includes an on-drive intelligent
controller that manages interface
protocols, data storage and retrieval
as well as ECC, defect handling and
diagnostics, power management, and
clock control. The controller’s rmware
is upgradeable, thus allowing feature
enhancements and rmware updates
while keeping the BOM stable.
Introduction to Cactus Technologies
220S Series Commercial Grade mSATA
SSD Products01