Instruction Manual
503 Series Industrial Grade CompactFlash Card Product Manual v2.1Cactus Technologies
®
55
020h 04h Link is 4 bytes Link Length
022h 00h
Low Byte of PCMCIA Manufacturer’s
Code
JEDEC Manufacturer’s ID
Low Byte of
PCMCIA Mfg ID
024h 00h
High Byte of PCMCIA Manufacturer’s
Code
Code of 0 because other byte is
JEDEC 1 byte Manufacturer’s ID
High Byte of
PCMCIA Mfg ID
026h 00h Low Byte of Product Code Manufacturer specic info
Low Byte
Product Code
028h 00h High Byte of Product Code Manufacturer specic info
High Byte
Product Code
02Ah 21h CISTPL_FUNCID Function ID Tuple Tuple Code
02Ch 02h Link length is 2 bytes
Link to next
tuple
02Eh 04h Function Type Code Disk Function Function Code
030h 01h
R
0
R
0
R
0
R
0
R
0
R
0
R
0
P
1
Attempt installation at Post
P: Install at POST
R: Reserved (0)
032h 22h CISTPL_FUNCE Function Extension Tuple Tuple Code
034h 02h Link length is 2 bytes
Link to next
tuple
036h 01h Disk Function Extension Tuple Type
Extension tuple describes the
Interface Protocol
Extension Tuple
Type for Disk
038h 01h Interface Type Code PC Card-ATA Interface Extension Info
03Ah 22h CISTPL_FUNCE Function Extension tuple Tuple Code
03Ch 03h This tuple has 3 info bytes Link Length
03Eh 02h Disk Function Extension Tuple Type
Basic PCMCIA-ATA Extension
tuple
Extension Tuple
Type for Disk
040h 04h
R
0
R
0
R
0
R
0
U
0
S
1
V
0
No Vpp, Silicon Drive with no
Unique Manufacturer/Serial
Number combined string
V=0:No Vpp Required
S:Silicon, else Rotating
U:ID Drive Mfg/SN not Unique
Basic ATA Option
Parameters
042h 07h
R
0
I
0
E
0
N
0
P3
0
P2
1
P1
1
P0
1
All power down modes and
power commands are not
needed to minimize power.
P0:Sleep Mode Supported
P1:Standby Mode Supported
P2:Idle Mode Supported
P3:No Drive Auto Power Control
N:Some Cong includes 3X7
E:Index Bit not Emulated
I:Twin -IOis16 unspecied
Extended
ATA Option
Parameters
044h 1Ah CISTPL_CONF Conguration Tuple Tuple Code