User Manual

36
11.2.2 Automatic and Manual HSS
The RF60X in Slave mode fully
supports HSS with Canon, Fujif ilm,
Nikon, Olympus, Panasonic, Pentax
cameras when commanded by the V6 II;
or HSS with Sony cameras when
commanded by the V6 IIs transceiver.
It will automatically sync with
camera shutters beyond x-sync speed.
However, when the RF60X Slave is
commanded by another RF60X, RF60 or
V6 TX, it is required to be manually
conf igured (see Section 11.2.4) to
sync beyond x-sync speed.
Check the table below for the type of
HSS support in each pairing option:
Master (TX ) Slave (RX) HSS Support
V6 II RF60X Automatic HSS / FP
sync with Canon,
Fuj i f ilm, Nikon,
Olympus, Panasonic,
Pentax cameras
V6 IIs RF60X Automatic HSS with
Sony cameras
RF60X, RF60,
V6
RF60X Manual HSS
(requires manual
conf igurations, see
Section 11.2.4)
11.2.3 Automatic HSS with V6 II or V6 IIs
In automatic HSS, the RF60X Slave
would f ire a normal ash whenever the
shutter speed of the camera is
set at or below its x-sync limit, or