User manual

19
Suggested
LV5 Setup
with Cactus
V5 Wireless
Flash
Transceiver
7.6
EMITTER
FLASH
V5 TX
V5 RX CAMERA
SENSOR
Option 2:
1. Use the Sensor’s wireless
function by pairing it with a
V5 RX. Set both to the same
channel (e.g. Ch 5).
2. Connect this V5 to camera by a
shutter cable (optional).
3. Set the pair of V5 used for
 w i r e l e s s  a s h t o a d i f fe r e n t 
channel (e.g. Ch 16).
EMITTER
V5 RX
V5 RX
V5 TX
FLASH
CAMERA
SENSOR
Option 1:
1. Connect the Sensor to camera
by shutter cable (optional).
2. Mount V5 TX to camera hot shoe
 a n d  a s h t o V 5 R X, b o t h s e t t o 
the same channel.
8. Advanced Operation
In certain situations, when (1) you need a pause between the
LV5 detecting an event and the moment the image is taken;
(2) you want to manipulate the length of a shutter signal
to trigger devices with different response time; or (3) you
want to stop the LV5 from responding to subsequent Events
for a certain period of time after an image was taken, two
timer functions of the LV5 – Delay and Freeze – can be used
to achieve these goals.