User Manual

18
automatic ash output via TTL metering, AF-
assist light, second curtain sync, and high
speed sync/FP shutter) provided by the TTL
ash system.
To enable the TTL pass-through in the V6 II
TX, press and hold
for 2 seconds. The LCD
will show the TTL pass-through indicator
at the left bottom corner where the channel
indicator used to be.
In TTL pass-through mode, the V6 II TX
cannot control the power level of the ash
attached.
To disable the TTL pass-through mode, press
and hold
for 2 seconds. The TTL pass-
through indicator will be replaced by the
channel indicator on the LCD.
Alternatively, the TTL pass-through mode can
be enabled or disabled in the <FUNCTIONS>
menu (see Section 9.7).