User Manual

20
2. Slide the V6 II into the camera’s hot
shoe.
3. Turn the lock lever of the V6 II to the
right to lock the multi-system shoe
(m a l e).
4. When detaching the V6 II from the
camera’s hot shoe, turn the lock lever to
the left to unlock the multi-system shoe
(male). Otherwise, the multi-system shoe
(male) may be damaged.
Note: At t a c h y o u r  a s h t o t h e V6 II a s y o u
would to the camera’s hot shoe. If your ash
is not locked securely on the Multi-System
S h o e (fe m a le), t r y h a l f-lo c k i n g t h e  a s h a n d
retracting it slightly from the Multi-System
Shoe until the locking pin hits the pinhole.
T h e n lo c k y o u r  a s h f u ll y t o t h e V6 II.
The V6 II control panel is equipped with a
Menu button
, an OK button , and a
selection dial
for quick access to
different functions and the conf iguration
menu.
The selection dial has a built-in push-in
button that serves as a quick OK button. You
may conf igure how the dial works to suit
9.3
Buttons
and Dial