User Manual

24
The Cactus V6 II is a wireless transceiver
that is capable of transmitting and
receiving radio signals. Set the V6 II
transceivers to the correct mode
(transmitter to “TX”, receiver to “RX”) by
sliding the mode switch to the correct
position. This will automatically power on
the transceivers.
The Cactus V6 II transceivers communicate
with one another via radio frequency. There
are 16 channels available. Always make sure
that all of your V6 II transceivers are set
to the same channel:
1. To set both the TX and RX to the same
channel, press
. Turn the selection
dial to <RADIO SETUP> and press OK. The
LCD will show <CHANNEL> and the default
channel number. Press
and turn the
selection dial to the preferred channel
number. Press
to set other menu items
or press
t o e x it.
2. The selected channel number will be
shown on the LCD display.
9.4
Choosing
the
Operating
Mode
9.5
Setting
the
Channel
and
Radio ID