User Manual

44
13.1.3 Quick Power Adjustment Mode
By turning the dial left or right one
“click”, the power level of the chosen
groups will increase or decrease by one
step. The EV step in the V6 II factory
setting is 1/3 EV. The EV step can be
conf igured to 1/2, 1/3, or 1/10 in the <EV
STEP> menu (see Section 13.3).
If you wish to quickly change the power
level using a larger interval, use the quick
power adjustment mode.
1. Switch on the V6 II in TX mode. Press
and turn the selection dial to
<PREFERENCES>. Press
and turn the
selection dial to <SWAP CONTROL>. Press
and turn the selection dial to <QUICK
POWER ADJ> and press
to cho ose.
2. In the main screen of the V6 II in TX
mode, press
once to enter the quick
power adjustment mode.
3. In this mode, each click of the dial will
increase or decrease the power level
for 1EV to and from the original value,
respectively. For example, if the power
le v e l of a g r o u p w a s 1/16 +3, o n e cl i ck