User Manual

51
hardly be detected by ash meter, but the
extremely short f iring duration helps
freeze faster-than-lightning moments and is
ideal for high-speed photography.
To enable Lo Power:
1. Switch on the V6 II in TX mode and
press
. Turn the selection dial to
<POWER SETUP> and press
. Turn the
selection dial to <Lo POWER> and press
. Turn the selection dial to <ON> and
press
.
2. Once Lo Power is enabled, it will be
shown as <Lo> at one step below 1/128
power in the relative power mode, or one
step below the lowest power of each group
in the absolute power mode.
3. To disable the Lo Power output, follow
step 1 to enter the <Lo POWER> menu. Turn
the selection dial to <OFF> and press
.