User Manual

57
To activate the Power Sync mode:
1. On the V6 II TX, press
. Turn the
selection dial to <FUNCTIONS> and press
. Turn the selection dial to <SYNC
MODE> and press
. Turn the selection
dial to <POWER SYNC> and press
. On
the status screen, the Power Sync icon
will be shown.
2. Switch the camera shutter beyond its
x- s y n c s p e e d a n d t a k e a p i ct u r e.
3. If the frame is not illuminated from top
to bottom, go back to the <SYNC MODE>
menu (repeat step 1). Press and hold
,
turn the selection dial simultaneously
to access the <POWER SYNC ADJ> panel.
When you see a dark band at the top of
the image, adjust the sync time to a
larger value (to delay the default sync
time). When the dark band appears at the
bottom, adjust the sync time to a smaller
value (to shorten the sync time).