User Manual

64
3. Mount one of the V6 II RXs onto the
camera’s hot shoe, and also connect the
V6 II RX to the camera’s shutter release
port with an appropriate shutter release
cable (optional). Connect the other V6 II
R X s t o t h e  a s h u n it s.
4. The on-camera V6 II RX will apply the
camera system setting last recorded in
the TX mode. Make sure you have selected
the correct camera system (see
S e cti o n 1 0).
5. Set the on-camera V6 II RX to relay mode.
Press
. Turn the selection dial to
<FUNCTIONS> and press
. Turn the
selection dial to <RELAY>. Press
.
Turn the selection dial to <ON>. Press
to conf irm and then press to
return to the main screen. The relay
mode indicator <REL-C> will appear on
the main screen.
6. In the handheld V6 II TX unit, press
.
Turn the selection dial to <FUNCTIONS>
and press
. Turn the selection dial to
<RELAY> and press
. Turn the dial to
<ON> and press
. Then press to
return to the main screen. The relay
mode indicator will replace the channel
indicator at the lower left-hand corner.