User Manual

66
16. Advanced Operations
The V6 II is equipped with an auto-focus
(AF) assist LED and it is capable of emitting
an AF-assist light in accordance with the
camera’s command. The power of the AF-assist
light can be adjusted in either TX or RX
mode to best suit your working environment.
To conf igure the AF-assist LED:
1. Switch on the V6 II in TX or RX mode.
Please note that the set up will be
applied to that operating mode only.
2. Press
and turn the selection dial to
<PREFERENCES>. Press
.
3. Turn the selection dial to <AF-ASSIST>
and press
. You will then be able to
turn on and select the power of the
AF-assist LED.
Each V6 II will memorize the AF-assist light
setting in the TX and RX independently. In
a setup when the AF-assist light of both the
TX and RX are turned on, the AF-assist light
on both devices will light up simultaneously
when the camera commands the TX to do so.
16.1
Auto-
focus
Assist
Light