User Manual

67
Note:
The V6 II TX completely replicates the
AF-assist signal commanded by the
connected camera. If the camera does
not support an AF-assist signal via the
hot shoe, the AF-assist LED will not be
activated.
The V6 II supports up to 20 TXs working
together in a lighting set up. Photographers
c a n s h a r e t h e s a m e s et of r e m o t e  a s h u n it s
and command them to f ire their desired
power output without being affected by the
other s.
To activate the Multi-master:
1. Switch on the V6 II in TX mode.
2. Press
. Turn the selection dial to
<RADIO SETUP> and press
.
3. Turn the selection dial to <MULTI-
MASTER> and press
. Select <ON> and
press
.
When any of the photographer in a group
presses the shutter, the V6 II TX will
trigger the RXs and command the ash to
f ire the conf igured power levels from that
speci f i c TX.
16.2
Multi-
master